Examples for how to set up continuwuity in docker.

continuwuity/livekit.yaml

@@ -0,0 +1,68 @@
+# ============================================================
+#  livekit.yaml — LiveKit Media Server Configuration
+#  Mount this at /etc/livekit.yaml in the livekit container.
+#
+#  Replace LK_MATRIX_KEY and LK_MATRIX_SECRET with the values
+#  generated by:
+#    docker run --rm livekit/livekit-server:latest generate-keys
+# ============================================================
+
+# HTTP/WebSocket port (proxied by Traefik)
+port: 7880
+
+# Bind to all interfaces (Traefik reaches it on 127.0.0.1:7880
+# since both livekit and the host share the network stack)
+bind_addresses:
+  - ""
+
+rtc:
+  # Direct TCP port for clients that can't use UDP
+  tcp_port: 7881
+
+  # UDP port range for media relay
+  # Starts at 50100 to leave room below for coturn if needed.
+  # Coturn is configured with min-port=50201 to avoid overlap.
+  port_range_start: 50100
+  port_range_end: 50200
+
+  # Required when running behind NAT — LiveKit advertises your
+  # public IP to clients rather than the internal Docker IP
+  use_external_ip: true
+
+  # Disable loopback candidates — not useful in production
+  enable_loopback_candidate: false
+
+  # Optional: Use your coturn server as a TURN relay for LiveKit.
+  # This improves connectivity for clients behind strict firewalls.
+  # Uncomment and fill in if you want LiveKit to use coturn:
+  #
+  # turn_servers:
+  #   - host: matrix.example.com
+  #     port: 3478
+  #     protocol: udp
+  #     secret: "YOUR_COTURN_SECRET"   # Same secret as coturn.conf
+  #   - host: matrix.example.com
+  #     port: 3478
+  #     protocol: tcp
+  #     secret: "YOUR_COTURN_SECRET"
+  #   - host: matrix.example.com
+  #     port: 5349
+  #     protocol: tls
+  #     secret: "YOUR_COTURN_SECRET"
+
+# API keys — must match LIVEKIT_KEY and LIVEKIT_SECRET
+# in the lk-jwt-service environment variables
+keys:
+  YOUR_LK_KEY: YOUR_LK_SECRET   # EDIT BOTH OF THESE
+
+# Optional: enable LiveKit's built-in TURN server.
+# Only useful for LiveKit connections — cannot be used by coturn
+# or legacy Matrix calls. Use this if you don't want a separate
+# coturn deployment and only care about group calls.
+#
+# turn:
+#   enabled: true
+#   udp_port: 3478
+#   relay_range_start: 50300
+#   relay_range_end: 50400
+#   domain: livekit.example.com