Fix verified status to not depend on DTLS fingerprint hash matching

hello's fingerprint-bound signature was the actual gate for `verified`
on both the CLI and PWA, and dtlsFP() only ever parses sha-256
fingerprints. Different WebRTC stacks report the DTLS cert hash under
different algorithms (WebKit: sha-512, pion/Chromium: sha-256), so a
legitimate cross-stack peer could never produce a verifiable hello —
degrading to permanently "unverified", or on the Go side, never
sending hello at all. Matches an interop gotcha waste-go's yaw2 docs
recently called out explicitly.

Real authentication already happens over the sealed signaling channel
during the ekey exchange (crypto.Verify), same as waste-go. Added
peerAuthed to the Go session (mirroring the PWA's existing field),
set once a sealed box from the peer opens successfully, and gate
`verified` on peerAuthed + hello.id matching instead. The fingerprint
signature is still sent/checked when both sides have a parseable
fingerprint, but only logged on mismatch — never blocking.

No behavior change for today's pion<->Chromium pairings (both sha-256).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2026 explewd
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

PROPOSAL-watch.md

@@ -0,0 +1,219 @@
+# Proposal: `flit watch` — one-way folder sync over flit
+
+**Status:** proposed, not built. Self-contained — written so a fresh agent
+with no prior conversation context can pick this up and implement it
+without anything explained first.
+
+## Context (read this first)
+
+Full background on flit is in [README.md](./README.md) and
+[PROTOCOL.md](./PROTOCOL.md) — read both before touching code. The
+relevant existing pieces for this proposal, all in `cli/`:
+
+- `cmd/flit/main.go` — `send(ctx, path)`: creates a `transport.Session`,
+  generates a one-shot room + QR invite, and on `OnConnected` calls
+  `sess.SendFile(path)`. **`SendFile` is synchronous and blocking** — it
+  returns only once the transfer is fully complete (or errors). Its
+  return value alone is a sufficient "did this actually get there"
+  signal; no separate completion callback exists or is needed.
+- `cmd/flit/daemon.go` — the pattern this proposal reuses almost
+  wholesale, just aimed the other direction:
+  - `daemonConfig`/`peerConfig` — TOML config (`~/.flit/daemon.toml`),
+    a list of trusted peers by `id`/`label`.
+  - `runPeerLoop(ctx, tc, myID, peer, downloadDir)` — maintains a
+    **persistent connection to one named peer**, reconnecting with
+    exponential backoff (2s → 30s cap) on disconnect. Sets
+    `OnFileOffer` to auto-accept anything the peer sends and save it to
+    `downloadDir`.
+  - This is receive-only today. **`flit watch` needs the send-side
+    sibling of this exact loop** — same persistent-connection/backoff
+    shape, but triggered by local filesystem events instead of incoming
+    offers.
+- `internal/transport/transport.go` — `Session.Join(ctx, roomName,
+  trustedPeerID)`, `transport.PairRoomName(a, b)` (deterministic
+  pairwise room from two peer IDs — this is what makes "known device,
+  no fresh QR" work at all), `Session.SendFile(path)`,
+  `Session.PeerID()`.
+
+## Motivation
+
+At one point the idea on the table was two-way directory sync — watch
+a folder, keep it mirrored to a known host, in both directions. That
+was deliberately walked back to **one-way sync**: source → destination
+only, push only, never reconciling anything back. That sidesteps the
+entire class of problem full bidirectional sync brings with it
+(conflict resolution, delete propagation, catch-up ordering). The
+moment this proposal starts growing bidirectional-anything, that's a
+sign it's drifting toward re-implementing a general sync tool — flit's
+own case study already draws that line explicitly ("Syncthing syncs
+continuously; too heavy for ad hoc one-offs" — flit is deliberately
+*not* trying to be that). This proposal should stay on the "one
+watched folder pushes new files to one named peer, and that's the
+whole feature" side of that line.
+
+The actual want: drop a file into a watched folder, it gets encrypted
+and pushed to a specific already-known device automatically — no
+manual `flit send`, no QR, no re-running anything by hand per file.
+
+## Design
+
+### 1. The receiving side needs no changes
+
+Worth stating plainly since it simplifies scope: an already-running
+`flit daemon`, configured with the sender as a trusted peer, already
+does exactly the right thing on receipt — auto-accept, save to
+`download_dir`. This proposal is entirely about the sending side.
+
+### 2. `flit watch` — a new subcommand, new config file
+
+`~/.flit/watch.toml`, same shape as `daemon.toml` deliberately, for
+familiarity:
+
+```toml
+signal_url = "wss://your-anchor.example.com/ws"
+turn_url = ""
+turn_secret = ""
+
+[[watch]]
+dir = "/home/user/backups/documents"
+peer_id = "<hex Ed25519 pubkey of the destination device>"
+peer_label = "home-server"
+pattern = "*.pdf,*.docx"   # optional glob include-list; default "*" if omitted
+stable_after = "10s"       # optional quiet period before considering a file ready
+```
+
+Multiple `[[watch]]` blocks are allowed — different folders can go to
+different peers, or the same peer, independently.
+
+### 3. Local state = the send queue, no separate queue structure needed
+
+One state file per watch entry:
+`~/.flit/watch-state/<sha256(dir + peer_id)>.json` —
+`{ "<relative-path>": { "size": N, "mtime": N, "sha256": "...", "sent_at": N|null } }`.
+
+**The invariant that makes this simple**: `sent_at` is only ever set
+*after* `SendFile` returns without error. A file with `sent_at: null`,
+or whose current size/mtime/hash no longer matches what's recorded, is
+"needs sending" — that's the entire queue. No separate retry logic:
+if `SendFile` fails partway (peer disconnects mid-transfer), the state
+was never advanced, so the file is exactly as eligible for retry on
+the next connection as it was before the attempt.
+
+### 4. Startup: reconcile state against reality, don't trust only live events
+
+On start, before subscribing to filesystem events, walk `dir`
+(respecting `pattern`) and diff against the state file. This catches
+anything that changed while the watcher wasn't running — a live-only
+`fsnotify` subscription would silently miss files dropped in during
+downtime.
+
+### 5. The watch-and-send loop — `runPeerLoop`'s sibling
+
+```go
+// runWatchLoop mirrors daemon.go's runPeerLoop: a persistent connection
+// to one named peer, reconnecting with the same backoff. Differs only in
+// what drives sends — a local file-ready queue instead of OnFileOffer.
+func runWatchLoop(ctx context.Context, tc transport.Config, myID string, w watchConfig, state *watchState) {
+    room := transport.PairRoomName(myID, w.PeerID)
+    backoff := 2 * time.Second
+
+    for {
+        if ctx.Err() != nil {
+            return
+        }
+        sess, err := transport.NewSession(dataDir(), tc)
+        // ... same connect/reconnect shape as runPeerLoop ...
+        sess.OnConnected = func(verified bool) {
+            backoff = 2 * time.Second
+            drainQueue(sess, w, state) // send everything currently queued, in order
+        }
+        // fsnotify events (and the startup reconciliation) push into the
+        // same queue; if already connected when a new file becomes ready,
+        // send it immediately rather than waiting for the next OnConnected.
+        ...
+    }
+}
+```
+
+`drainQueue` sends queued files one at a time via `sess.SendFile(path)`
+— sequential, not concurrent, since flit's session model is one peer
+connection at a time and concurrent sends would need to be queued
+DataChannel-side anyway (see "Multi-file send" in the flit case study
+for the existing precedent of handling several files across one
+session, just not built for a filesystem-driven trigger).
+
+### 6. Debounce — don't send a file mid-write
+
+`stable_after` is a quiet-period debounce: after the *last* fsnotify
+write event for a given file, wait that long before considering it
+ready. Without this, a large file being actively written would get
+offered (and likely fail hash verification on the receiving end, or
+worse, silently transfer a truncated version) the moment its first
+bytes land. This is a real requirement, not a nice-to-have — flag it
+as such if a fresh implementation is tempted to skip it for a first
+cut.
+
+### 7. Never touches deletes
+
+The watcher only reacts to create/write events. A file deleted from
+the source directory is never deleted from the destination, and never
+should be — that's the entire point of one-way sync rather than a
+mirror. Don't wire up `fsnotify`'s remove/rename events to anything
+that deletes on the far end.
+
+## Security considerations
+
+- **This sends files with no per-file human confirmation** — a
+  deliberate, meaningful departure from interactive `flit send`
+  (always a conscious action) and even from `daemon`'s auto-accept
+  (still gated behind that peer being explicitly marked trusted with
+  `autoAccept` in the keyring). The safety knob here is entirely
+  `watch.toml` itself: which directories are named, and each entry's
+  `pattern`. Recommend a **`flit watch --dry-run`** mode that walks the
+  configured directories and prints what *would* be sent, without
+  connecting to anything — a way to sanity-check a new watch config
+  before it goes live and silently starts pushing files.
+- **`pattern` should default to something narrower than `*` in
+  practice**, even though `*` is the technical default if omitted —
+  worth calling out in whatever docs ship with this, since an
+  unconstrained watch on a broad directory (e.g. a whole home folder)
+  turns "sync my documents" into "sync everything that ever lands in
+  this tree," which is a much bigger promise than most `[[watch]]`
+  entries are meant to make.
+- **The destination is exactly as trusted as any other flit peer** —
+  this doesn't introduce a new trust primitive, it reuses the existing
+  Ed25519 identity + pairwise-room model as-is. A `peer_id` here is
+  the same kind of already-known, already-paired device as anything in
+  the PWA's "Known devices" list or `daemon.toml`.
+- **No encryption-at-rest concern beyond what already exists** — files
+  are E2E encrypted in transit exactly like every other flit transfer;
+  this proposal doesn't change flit's crypto at all, only adds a new
+  trigger for when `SendFile` gets called.
+
+## Open questions
+
+- **Large initial backlogs** — if `dir` already has thousands of files
+  on first run, the startup reconciliation queues all of them at once.
+  Sequential sending (per §5) means this could take a long time before
+  catching up to "live." Acceptable for a first cut; a
+  `--max-startup-queue` or similar throttle could be added later if
+  this turns out to matter in practice — not designing it ahead of an
+  actual backlog being a problem.
+- **Multiple watchers targeting the same peer simultaneously** — each
+  `[[watch]]` entry in §5's design opens its own `runWatchLoop`, meaning
+  its own separate connection/room to the same peer if two entries
+  share a `peer_id`. `transport.PairRoomName` is deterministic per
+  peer pair, so two simultaneous sessions to the same peer would
+  collide on the same room name — this needs either a single shared
+  connection per unique `peer_id` (multiple watch entries feeding one
+  `runWatchLoop`/queue) or confirmation that flit's transport already
+  tolerates multiple simultaneous sessions to the same room gracefully.
+  **Needs resolving before implementation, not deferred** — this is a
+  correctness question about the connection model, not a nice-to-have.
+- **State file corruption/loss** — if `~/.flit/watch-state/*.json` is
+  lost (disk issue, manual deletion), the next startup reconciliation
+  will treat every file as unsent and re-push the entire directory.
+  Harmless for correctness (the destination just re-receives what it
+  already has) but potentially slow/wasteful for a large directory.
+  Worth a passing mention in user-facing docs, not worth engineering
+  around for a first version.

README.md

@@ -20,6 +20,7 @@ It is deliberately not a replacement for [Zipline](https://github.com/diced/zipl
 - Auto-downloads on the receiver side — no "click to save" step.
 - In-app QR scanner (Chrome/Android) — scan the sender's QR without leaving flit.
 - Android share sheet integration — "Share → flit" works from Photos, Files, any app.
+- One-way folder sync (`flit watch`) — drop a file into a watched folder, it gets pushed to a trusted peer automatically, no manual send.
 
 ---
 
@@ -52,9 +53,9 @@ Each device generates an **Ed25519 keypair** on first run. The hex-encoded publi
 
 Pairing uses [yaw/2.1](PROTOCOL.md) forward-secret signaling, trimmed for flit's 1:1 ephemeral use case:
 
-1. Connecting peers exchange **ephemeral X25519 keys** (`ekey`) signed with their Ed25519 identity keys — providing forward secrecy for the signaling channel.
-2. Once the WebRTC data channel opens, each side sends a **`hello`** message containing their identity and a signature over a known prefix. This binds the WebRTC DTLS fingerprint to the Ed25519 identity, confirming "the device on the other end is who the QR said it was."
-3. File data flows over the WebRTC data channel — encrypted by DTLS, with the identity-confirmed binding from step 2.
+1. Connecting peers exchange **ephemeral X25519 keys** (`ekey`) signed with their Ed25519 identity keys over the sealed signaling channel — this is what actually authenticates "the device on the other end is who the QR said it was."
+2. Once the WebRTC data channel opens, each side sends a **`hello`** message confirming its identity, plus a best-effort signature binding it to the session's DTLS fingerprint when both sides report that fingerprint under a hash algorithm flit can parse. `verified` status rests on step 1 (the authenticated sealed exchange) and `hello.id` matching it — not on the fingerprint signature, which different WebRTC stacks may report under different hash algorithms (WebKit: sha-512, Chromium/pion: sha-256) and so can't be relied on to match even between two legitimate peers.
+3. File data flows over the WebRTC data channel — encrypted by DTLS, with the identity already confirmed by step 1.
 
 The anchor never sees plaintext message content — it only routes sealed (encrypted) blobs by peer id and hashed room name.
 
@@ -101,6 +102,7 @@ For headless machines (homelab boxes, servers) that can't run a browser.
 flit send path/to/file.tar.gz     # print QR + invite, wait for peer, send
 flit recv "flit:eyJhbmNob3..."    # join from invite string, accept file
 flit daemon                        # persistent receiver for trusted peers
+flit watch [--dry-run]             # watch folders, auto-push new files to trusted peers
 ```
 
 **Built with:** Go, pion/webrtc, libsodium (via nhooyr.io/websocket + internal crypto).
@@ -132,6 +134,38 @@ Copy `cli/daemon.toml.example` to `~/.flit/daemon.toml` to get started. The daem
 
 **Bootstrapping:** to get a peer's `id`, pair once via QR (`flit send` / PWA "Invite new") and copy the hex ID from the "peer connected" log line, or read it from the PWA's Known devices list after tapping "Remember this device."
 
+### Watch mode
+
+`flit watch` is the send-side sibling of `flit daemon`: it watches one or more local folders and automatically pushes new or changed files to a specific trusted peer — no manual `flit send`, no QR, no per-file interaction. It's **one-way sync only** (source → destination, push only) — deliberately not a general bidirectional sync tool, and it never propagates deletes.
+
+The receiving side needs no changes: an already-running `flit daemon`, configured with the watcher's device as a trusted peer, already does the right thing on receipt.
+
+Config lives at `~/.flit/watch.toml`:
+
+```toml
+signal_url = "wss://your-anchor.example.com/ws"
+turn_url   = ""   # optional
+turn_secret = ""  # optional
+
+[[watch]]
+dir = "/home/user/backups/documents"
+peer_id = "<hex Ed25519 pubkey of the destination device>"
+peer_label = "home-server"
+pattern = "*.pdf,*.docx"   # optional glob include-list; default "*" if omitted
+stable_after = "10s"       # optional quiet period before considering a file ready
+```
+
+Multiple `[[watch]]` blocks are allowed — different folders can go to different peers, or the same peer (entries sharing a `peer_id` share a single connection).
+
+Copy `cli/watch.toml.example` to `~/.flit/watch.toml` to get started. Notes on behavior:
+
+- **Startup reconciliation** — on start, before subscribing to filesystem events, `flit watch` walks each `dir` and diffs it against local state, so anything that changed while the watcher wasn't running gets picked up (not just live events going forward).
+- **Debounce (`stable_after`)** — a file is only considered ready to send after this quiet period has passed since its last write, so a large file being actively written isn't offered mid-write.
+- **State tracking** — one JSON state file per `[[watch]]` entry lives in `~/.flit/watch-state/`, recording what's been sent. If a send fails partway (peer disconnects mid-transfer), the file is retried on the next successful connection — no separate retry logic needed. Losing this state is harmless (worst case: the whole directory gets re-sent) but not something to engineer around.
+- **`flit watch --dry-run`** walks the configured directories and prints what *would* be sent, without connecting to anything — use it to sanity-check a new `watch.toml` before it goes live.
+- **`pattern` should be as narrow as your use case allows.** `*` is the default if omitted, but an unconstrained watch on a broad directory turns "sync my documents" into "sync everything that ever lands in this tree." There's no per-file confirmation in watch mode — the directory and pattern in `watch.toml` are the only safety knob.
+- Reconnects with the same exponential backoff (2s → 30s cap) as daemon mode, and reuses the same trusted-peer identity model — a `peer_id` here is the same kind of already-known device as anything in the PWA's Known devices list or `daemon.toml`.
+
 ---
 
 ## Self-hosting

cli/cmd/flit/main.go

@@ -4,6 +4,7 @@
 //	flit send <path>          generate a one-shot room, print QR + invite, wait for a peer, send
 //	flit recv <invite|code>   join a room from an invite string, accept the offered file
 //	flit daemon               run as a persistent receiver for trusted peers (reads ~/.flit/daemon.toml)
+//	flit watch [--dry-run]    watch folders and auto-push new files to trusted peers (reads ~/.flit/watch.toml)
 package main
 
 import (
@@ -93,7 +94,7 @@ func cfg() transport.Config {
 
 func main() {
 	if len(os.Args) < 2 {
-		fmt.Println("usage: flit send <path> | flit recv <invite> | flit daemon")
+		fmt.Println("usage: flit id | flit send <path> | flit recv <invite> | flit daemon | flit watch [--dry-run]")
 		os.Exit(1)
 	}
 
@@ -117,8 +118,11 @@ func main() {
 		recv(ctx, os.Args[2])
 	case "daemon":
 		runDaemon(ctx)
+	case "watch":
+		dryRun := len(os.Args) > 2 && os.Args[2] == "--dry-run"
+		runWatch(ctx, dryRun)
 	default:
-		fmt.Println("usage: flit id | flit send <path> | flit recv <invite> | flit daemon")
+		fmt.Println("usage: flit id | flit send <path> | flit recv <invite> | flit daemon | flit watch [--dry-run]")
 		os.Exit(1)
 	}
 }

cli/cmd/flit/watch.go

@@ -0,0 +1,532 @@
+package main
+
+import (
+	"context"
+	"crypto/sha256"
+	"encoding/hex"
+	"encoding/json"
+	"fmt"
+	"log"
+	"os"
+	"path/filepath"
+	"sort"
+	"strings"
+	"sync"
+	"time"
+
+	"github.com/BurntSushi/toml"
+	"github.com/fsnotify/fsnotify"
+
+	"flit/internal/transport"
+)
+
+// watchFileConfig is read from ~/.flit/watch.toml.
+type watchFileConfig struct {
+	SignalURL  string             `toml:"signal_url"`
+	TurnURL    string             `toml:"turn_url"`
+	TurnSecret string             `toml:"turn_secret"`
+	Watches    []watchEntryConfig `toml:"watch"`
+}
+
+type watchEntryConfig struct {
+	Dir         string `toml:"dir"`
+	PeerID      string `toml:"peer_id"`
+	PeerLabel   string `toml:"peer_label"`
+	Pattern     string `toml:"pattern"`
+	StableAfter string `toml:"stable_after"`
+}
+
+func watchConfigPath() string {
+	home, _ := os.UserHomeDir()
+	return filepath.Join(home, ".flit", "watch.toml")
+}
+
+func watchStateDir() string {
+	home, _ := os.UserHomeDir()
+	return filepath.Join(home, ".flit", "watch-state")
+}
+
+func loadWatchConfig() (*watchFileConfig, error) {
+	path := watchConfigPath()
+	var cfg watchFileConfig
+	if _, err := toml.DecodeFile(path, &cfg); err != nil {
+		return nil, fmt.Errorf("reading %s: %w", path, err)
+	}
+	if cfg.SignalURL == "" {
+		return nil, fmt.Errorf("%s: signal_url is required", path)
+	}
+	if len(cfg.Watches) == 0 {
+		return nil, fmt.Errorf("%s: no [[watch]] entries configured", path)
+	}
+	for i := range cfg.Watches {
+		w := &cfg.Watches[i]
+		if w.Dir == "" {
+			return nil, fmt.Errorf("%s: watch entry %d missing dir", path, i)
+		}
+		w.Dir = expandHome(w.Dir)
+		if w.PeerID == "" {
+			return nil, fmt.Errorf("%s: watch entry for %s missing peer_id", path, w.Dir)
+		}
+		if w.PeerLabel == "" {
+			w.PeerLabel = w.PeerID[:min16(w.PeerID)]
+		}
+		if w.Pattern == "" {
+			w.Pattern = "*"
+		}
+		if w.StableAfter == "" {
+			w.StableAfter = "10s"
+		}
+	}
+	return &cfg, nil
+}
+
+// fileState is the per-file record kept in a watch entry's state file.
+// SentAt is nil until SendFile has returned successfully for exactly this
+// size/mtime — that's the entire "needs sending" queue (see PROPOSAL-watch.md §3).
+type fileState struct {
+	Size   int64  `json:"size"`
+	Mtime  int64  `json:"mtime"`
+	SHA256 string `json:"sha256,omitempty"`
+	SentAt *int64 `json:"sent_at"`
+}
+
+// watchEntry is one [[watch]] block: a directory watched for one peer.
+type watchEntry struct {
+	cfg         watchEntryConfig
+	stableAfter time.Duration
+	statePath   string
+
+	mu    sync.Mutex
+	state map[string]fileState
+}
+
+func newWatchEntry(cfg watchEntryConfig) (*watchEntry, error) {
+	d, err := time.ParseDuration(cfg.StableAfter)
+	if err != nil {
+		return nil, fmt.Errorf("dir %s: invalid stable_after %q: %w", cfg.Dir, cfg.StableAfter, err)
+	}
+	sum := sha256.Sum256([]byte(cfg.Dir + cfg.PeerID))
+	e := &watchEntry{
+		cfg:         cfg,
+		stableAfter: d,
+		statePath:   filepath.Join(watchStateDir(), hex.EncodeToString(sum[:])+".json"),
+		state:       map[string]fileState{},
+	}
+	return e, nil
+}
+
+func (e *watchEntry) load() error {
+	data, err := os.ReadFile(e.statePath)
+	if os.IsNotExist(err) {
+		return nil
+	}
+	if err != nil {
+		return err
+	}
+	e.mu.Lock()
+	defer e.mu.Unlock()
+	return json.Unmarshal(data, &e.state)
+}
+
+func (e *watchEntry) save() error {
+	e.mu.Lock()
+	data, err := json.MarshalIndent(e.state, "", "  ")
+	e.mu.Unlock()
+	if err != nil {
+		return err
+	}
+	if err := os.MkdirAll(filepath.Dir(e.statePath), 0700); err != nil {
+		return err
+	}
+	return os.WriteFile(e.statePath, data, 0600)
+}
+
+// matches checks a file's base name against the entry's comma-separated
+// glob pattern list.
+func (e *watchEntry) matches(name string) bool {
+	for _, pat := range strings.Split(e.cfg.Pattern, ",") {
+		pat = strings.TrimSpace(pat)
+		if pat == "" {
+			continue
+		}
+		if ok, _ := filepath.Match(pat, name); ok {
+			return true
+		}
+	}
+	return false
+}
+
+// noteObserved records the current size/mtime for relPath and, if they
+// differ from what was last successfully sent (or nothing was ever sent),
+// marks the file ready to send by clearing sent_at.
+func (e *watchEntry) noteObserved(relPath string, size, mtime int64) (readyNow bool) {
+	e.mu.Lock()
+	defer e.mu.Unlock()
+	cur, ok := e.state[relPath]
+	if ok && cur.SentAt != nil && cur.Size == size && cur.Mtime == mtime {
+		return false // already sent this exact version
+	}
+	e.state[relPath] = fileState{Size: size, Mtime: mtime, SHA256: cur.SHA256, SentAt: nil}
+	return true
+}
+
+func (e *watchEntry) markSent(relPath string, size, mtime int64, sha string) {
+	e.mu.Lock()
+	defer e.mu.Unlock()
+	now := time.Now().Unix()
+	e.state[relPath] = fileState{Size: size, Mtime: mtime, SHA256: sha, SentAt: &now}
+}
+
+// pendingSorted returns relative paths currently marked as needing a send,
+// in a deterministic order.
+func (e *watchEntry) pendingSorted() []string {
+	e.mu.Lock()
+	defer e.mu.Unlock()
+	var out []string
+	for rel, st := range e.state {
+		if st.SentAt == nil {
+			out = append(out, rel)
+		}
+	}
+	sort.Strings(out)
+	return out
+}
+
+// reconcile walks the watched directory and updates in-memory state for
+// anything that's new or changed since it was last recorded (PROPOSAL-watch.md §4).
+// It does not touch the filesystem beyond reading; call save() afterward to persist.
+func (e *watchEntry) reconcile() error {
+	entries, err := os.ReadDir(e.cfg.Dir)
+	if err != nil {
+		return err
+	}
+	for _, de := range entries {
+		if de.IsDir() || !e.matches(de.Name()) {
+			continue
+		}
+		info, err := de.Info()
+		if err != nil {
+			continue
+		}
+		e.noteObserved(de.Name(), info.Size(), info.ModTime().Unix())
+	}
+	return nil
+}
+
+// watchPeerGroup shares one persistent connection across every [[watch]]
+// entry targeting the same peer_id (PROPOSAL-watch.md open question #2).
+type watchPeerGroup struct {
+	peerID  string
+	label   string
+	entries []*watchEntry
+
+	mu   sync.Mutex
+	sess *transport.Session
+
+	sendMu sync.Mutex
+}
+
+func (g *watchPeerGroup) currentSession() *transport.Session {
+	g.mu.Lock()
+	defer g.mu.Unlock()
+	return g.sess
+}
+
+// sendOne sends one file and, on success, advances that file's state past
+// "needs sending". On failure the state is left untouched, so the file
+// remains eligible for retry on the next drain (PROPOSAL-watch.md §3).
+func (g *watchPeerGroup) sendOne(sess *transport.Session, e *watchEntry, rel string) error {
+	g.sendMu.Lock()
+	defer g.sendMu.Unlock()
+
+	full := filepath.Join(e.cfg.Dir, rel)
+	info, err := os.Stat(full)
+	if err != nil {
+		return err
+	}
+	log.Printf("[%s] → %s", g.label, rel)
+	if err := sess.SendFile(full); err != nil {
+		return err
+	}
+	e.markSent(rel, info.Size(), info.ModTime().Unix(), "")
+	if err := e.save(); err != nil {
+		log.Printf("[%s] warning: could not persist state for %s: %v", g.label, e.cfg.Dir, err)
+	}
+	log.Printf("[%s] ✓ sent %s", g.label, rel)
+	return nil
+}
+
+// drainAll sends every currently-pending file across every entry in the
+// group, sequentially (PROPOSAL-watch.md §5). Stops early on the first
+// send error, since that almost always means the connection just dropped;
+// remaining files stay queued for the next successful connect.
+func (g *watchPeerGroup) drainAll() {
+	sess := g.currentSession()
+	if sess == nil {
+		return
+	}
+	for _, e := range g.entries {
+		for _, rel := range e.pendingSorted() {
+			if g.currentSession() != sess {
+				return // disconnected mid-drain
+			}
+			if err := g.sendOne(sess, e, rel); err != nil {
+				log.Printf("[%s] send failed for %s: %v", g.label, rel, err)
+				return
+			}
+		}
+	}
+}
+
+// attemptSendNow sends rel immediately if the group is currently connected.
+// If not connected, the file simply stays marked pending — the next
+// successful connect's drainAll will pick it up.
+func (g *watchPeerGroup) attemptSendNow(e *watchEntry, rel string) {
+	sess := g.currentSession()
+	if sess == nil {
+		return
+	}
+	if err := g.sendOne(sess, e, rel); err != nil {
+		log.Printf("[%s] send failed for %s: %v", g.label, rel, err)
+	}
+}
+
+// runWatchGroup mirrors daemon.go's runPeerLoop: a persistent connection to
+// one trusted peer, reconnecting with the same backoff. It differs only in
+// what drives sends — pending state across the group's entries, rather than
+// incoming OnFileOffer.
+func runWatchGroup(ctx context.Context, tc transport.Config, myID string, g *watchPeerGroup) {
+	room := transport.PairRoomName(myID, g.peerID)
+	log.Printf("[%s] room: %s", g.label, room)
+	backoff := 2 * time.Second
+
+	for {
+		if ctx.Err() != nil {
+			return
+		}
+
+		log.Printf("[%s] connecting…", g.label)
+		disconnected := make(chan struct{})
+
+		sess, err := transport.NewSession(dataDir(), tc)
+		if err != nil {
+			log.Printf("[%s] session error: %v", g.label, err)
+		} else {
+			sess.OnConnected = func(verified bool) {
+				status := "unverified"
+				if verified {
+					status = "verified"
+				}
+				log.Printf("[%s] connected (%s)", g.label, status)
+				backoff = 2 * time.Second
+				g.mu.Lock()
+				g.sess = sess
+				g.mu.Unlock()
+				go g.drainAll()
+			}
+			sess.OnDisconnected = func() {
+				g.mu.Lock()
+				if g.sess == sess {
+					g.sess = nil
+				}
+				g.mu.Unlock()
+				select {
+				case <-disconnected:
+				default:
+					close(disconnected)
+				}
+			}
+
+			if err := sess.Join(ctx, room, g.peerID); err != nil {
+				log.Printf("[%s] join error: %v", g.label, err)
+			} else {
+				select {
+				case <-ctx.Done():
+					return
+				case <-disconnected:
+					log.Printf("[%s] disconnected", g.label)
+				}
+			}
+		}
+
+		select {
+		case <-ctx.Done():
+			return
+		case <-time.After(backoff):
+		}
+		if backoff < 30*time.Second {
+			backoff *= 2
+		}
+	}
+}
+
+// watchDirLive subscribes to filesystem events for one entry and, after a
+// stable_after quiet period with no further writes to a given file, marks
+// it ready and (if connected) sends it immediately. Deletes/renames are
+// deliberately ignored (PROPOSAL-watch.md §7) — this is push-only, one-way.
+func watchDirLive(ctx context.Context, e *watchEntry, g *watchPeerGroup) error {
+	w, err := fsnotify.NewWatcher()
+	if err != nil {
+		return err
+	}
+	defer w.Close()
+	if err := w.Add(e.cfg.Dir); err != nil {
+		return err
+	}
+
+	var mu sync.Mutex
+	timers := map[string]*time.Timer{}
+
+	fire := func(name string) {
+		full := filepath.Join(e.cfg.Dir, name)
+		info, err := os.Stat(full)
+		if err != nil {
+			return // removed again before it went stable
+		}
+		if e.noteObserved(name, info.Size(), info.ModTime().Unix()) {
+			_ = e.save()
+			g.attemptSendNow(e, name)
+		}
+	}
+
+	for {
+		select {
+		case <-ctx.Done():
+			mu.Lock()
+			for _, t := range timers {
+				t.Stop()
+			}
+			mu.Unlock()
+			return nil
+		case ev, ok := <-w.Events:
+			if !ok {
+				return nil
+			}
+			if ev.Op&(fsnotify.Write|fsnotify.Create) == 0 {
+				continue
+			}
+			name := filepath.Base(ev.Name)
+			if !e.matches(name) {
+				continue
+			}
+			mu.Lock()
+			if t, ok := timers[name]; ok {
+				t.Stop()
+			}
+			timers[name] = time.AfterFunc(e.stableAfter, func() { fire(name) })
+			mu.Unlock()
+		case err, ok := <-w.Errors:
+			if !ok {
+				return nil
+			}
+			log.Printf("watch %s: fsnotify error: %v", e.cfg.Dir, err)
+		}
+	}
+}
+
+func runWatch(ctx context.Context, dryRun bool) {
+	cfg, err := loadWatchConfig()
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "flit watch:", err)
+		fmt.Fprintf(os.Stderr, "create %s — see watch.toml.example\n", watchConfigPath())
+		os.Exit(1)
+	}
+
+	entries := make([]*watchEntry, 0, len(cfg.Watches))
+	for _, wc := range cfg.Watches {
+		if _, err := os.Stat(wc.Dir); err != nil {
+			fmt.Fprintf(os.Stderr, "flit watch: %s: %v\n", wc.Dir, err)
+			os.Exit(1)
+		}
+		e, err := newWatchEntry(wc)
+		if err != nil {
+			fmt.Fprintln(os.Stderr, "flit watch:", err)
+			os.Exit(1)
+		}
+		entries = append(entries, e)
+	}
+
+	if dryRun {
+		for _, e := range entries {
+			if err := e.load(); err != nil {
+				fmt.Fprintf(os.Stderr, "flit watch: %s: reading state: %v\n", e.cfg.Dir, err)
+				os.Exit(1)
+			}
+			if err := e.reconcile(); err != nil {
+				fmt.Fprintf(os.Stderr, "flit watch: %s: %v\n", e.cfg.Dir, err)
+				os.Exit(1)
+			}
+			pending := e.pendingSorted()
+			fmt.Printf("%s → %s (%d file(s) would be sent):\n", e.cfg.Dir, e.cfg.PeerLabel, len(pending))
+			for _, rel := range pending {
+				fmt.Printf("  %s\n", rel)
+			}
+		}
+		return
+	}
+
+	for _, e := range entries {
+		if err := e.load(); err != nil {
+			fmt.Fprintf(os.Stderr, "flit watch: %s: reading state: %v\n", e.cfg.Dir, err)
+			os.Exit(1)
+		}
+	}
+
+	tc := transport.Config{SignalURL: cfg.SignalURL, TurnURL: cfg.TurnURL, TurnSecret: cfg.TurnSecret}
+
+	probe, err := transport.NewSession(dataDir(), tc)
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "flit watch: identity error:", err)
+		os.Exit(1)
+	}
+	myID := probe.PeerID()
+
+	groups := map[string]*watchPeerGroup{}
+	var order []string
+	for _, e := range entries {
+		g, ok := groups[e.cfg.PeerID]
+		if !ok {
+			g = &watchPeerGroup{peerID: e.cfg.PeerID, label: e.cfg.PeerLabel}
+			groups[e.cfg.PeerID] = g
+			order = append(order, e.cfg.PeerID)
+		}
+		g.entries = append(g.entries, e)
+	}
+
+	log.Printf("flit watch starting — id %s…", myID[:16])
+	log.Printf("  anchor : %s", cfg.SignalURL)
+	log.Printf("  dirs   : %d, peers : %d", len(entries), len(groups))
+
+	var wg sync.WaitGroup
+	for _, e := range entries {
+		if err := e.reconcile(); err != nil {
+			fmt.Fprintf(os.Stderr, "flit watch: %s: %v\n", e.cfg.Dir, err)
+			os.Exit(1)
+		}
+		if err := e.save(); err != nil {
+			log.Printf("warning: could not persist state for %s: %v", e.cfg.Dir, err)
+		}
+	}
+
+	for _, peerID := range order {
+		g := groups[peerID]
+		wg.Add(1)
+		go func(g *watchPeerGroup) {
+			defer wg.Done()
+			runWatchGroup(ctx, tc, myID, g)
+		}(g)
+
+		for _, e := range g.entries {
+			wg.Add(1)
+			go func(e *watchEntry, g *watchPeerGroup) {
+				defer wg.Done()
+				if err := watchDirLive(ctx, e, g); err != nil {
+					log.Printf("watch %s: %v", e.cfg.Dir, err)
+				}
+			}(e, g)
+		}
+	}
+
+	wg.Wait()
+	log.Println("flit watch stopped")
+}

cli/go.mod

@@ -13,6 +13,7 @@ require (
 require (
 	github.com/BurntSushi/toml v1.6.0 // indirect
 	github.com/davecgh/go-spew v1.1.1 // indirect
+	github.com/fsnotify/fsnotify v1.10.1 // indirect
 	github.com/google/uuid v1.3.1 // indirect
 	github.com/pion/datachannel v1.5.8 // indirect
 	github.com/pion/dtls/v2 v2.2.12 // indirect

cli/go.sum

@@ -5,6 +5,8 @@ github.com/BurntSushi/toml v1.6.0/go.mod h1:ukJfTF/6rtPPRCnwkur4qwRxa8vTRFBF0uk2
 github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/fsnotify/fsnotify v1.10.1 h1:b0/UzAf9yR5rhf3RPm9gf3ehBPpf0oZKIjtpKrx59Ho=
+github.com/fsnotify/fsnotify v1.10.1/go.mod h1:TLheqan6HD6GBK6PrDWyDPBaEV8LspOxvPSjC+bVfgo=
 github.com/google/uuid v1.3.1 h1:KjJaJ9iWZ3jOFZIf1Lqf4laDRCasjl0BCmnEGxkdLb4=
 github.com/google/uuid v1.3.1/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
 github.com/kr/pretty v0.1.0 h1:L/CwN0zerZDmRFUapSPitk6f+Q3+0za1rQkzVuMiMFI=

cli/internal/transport/transport.go

@@ -172,6 +172,7 @@ type Session struct {
 	dc           *webrtc.DataChannel
 	peerID       string
 	verified     bool
+	peerAuthed   bool // set once a sealed box from peerID has been opened successfully
 	esk, epk     *[32]byte
 	peerEPK      *[32]byte
 	ekeySent     bool
@@ -423,6 +424,9 @@ func (s *Session) onBox(from, box string) {
 	if plain == nil {
 		return
 	}
+	s.mu.Lock()
+	s.peerAuthed = true
+	s.mu.Unlock()
 	var obj map[string]any
 	if err := json.Unmarshal(plain, &obj); err != nil {
 		return
@@ -573,20 +577,25 @@ func (s *Session) sendHello() {
 	if pc == nil {
 		return
 	}
-	lfp, err1 := dtlsFP(pc.LocalDescription().SDP)
-	rfp, err2 := dtlsFP(pc.RemoteDescription().SDP)
-	if err1 != nil || err2 != nil {
-		log.Printf("flit: sendHello: fingerprint error: %v / %v", err1, err2)
-		return
-	}
-	// §6: sender signs prefix || local_fp || remote_fp
-	bindMsg := append([]byte(bindPrefix), lfp...)
-	bindMsg = append(bindMsg, rfp...)
-	s.controlSend(map[string]string{
+	msg := map[string]string{
 		"type": "hello",
 		"id":   s.identity.PeerID(),
-		"sig":  s.identity.Sign(bindMsg),
-	})
+	}
+	// §6: sign prefix || local_fp || remote_fp when both are extractable.
+	// This is best-effort, not required — different WebRTC stacks report the
+	// DTLS certificate hash under different algorithms (WebKit: sha-512,
+	// pion/Chromium: sha-256), so a legitimate cross-stack peer may have no
+	// fingerprint we know how to parse. Trust rests on the sealed signaling
+	// exchange that already authenticated s.peerID (see onBox/peerAuthed)
+	// plus hello.id matching it, not on this signature — see onControl.
+	if lfp, err1 := dtlsFP(pc.LocalDescription().SDP); err1 == nil {
+		if rfp, err2 := dtlsFP(pc.RemoteDescription().SDP); err2 == nil {
+			bindMsg := append([]byte(bindPrefix), lfp...)
+			bindMsg = append(bindMsg, rfp...)
+			msg["sig"] = s.identity.Sign(bindMsg)
+		}
+	}
+	s.controlSend(msg)
 }
 
 func (s *Session) onControl(data []byte) {
@@ -598,11 +607,18 @@ func (s *Session) onControl(data []byte) {
 	case "hello":
 		helloID, _ := m["id"].(string)
 		sigHex, _ := m["sig"].(string)
-		verified := false
 		s.mu.Lock()
 		pc := s.pc
+		peerAuthed := s.peerAuthed
 		s.mu.Unlock()
-		if pc != nil && pc.RemoteDescription() != nil && pc.LocalDescription() != nil {
+		// Trust rests on the sealed signaling exchange that already
+		// authenticated s.peerID (peerAuthed, set in onBox) plus hello.id
+		// matching it — not on the fingerprint-bound signature below,
+		// which is only checkable when both sides report their DTLS cert
+		// hash under an algorithm we can parse. See sendHello for why
+		// that can't be a hard requirement.
+		verified := helloID == s.peerID && peerAuthed
+		if sigHex != "" && pc != nil && pc.RemoteDescription() != nil && pc.LocalDescription() != nil {
 			// §6: verifier reconstructs prefix || remote_fp || local_fp
 			// (sender's local = our remote; sender's remote = our local)
 			rfp, err1 := dtlsFP(pc.RemoteDescription().SDP)
@@ -610,9 +626,9 @@ func (s *Session) onControl(data []byte) {
 			if err1 == nil && err2 == nil {
 				bindMsg := append([]byte(bindPrefix), rfp...)
 				bindMsg = append(bindMsg, lfp...)
-				verified = helloID == s.peerID && crypto.Verify(helloID, bindMsg, sigHex) == nil
-			} else {
-				log.Printf("flit: hello verify: fingerprint error: %v / %v", err1, err2)
+				if err := crypto.Verify(helloID, bindMsg, sigHex); err != nil {
+					log.Printf("flit: hello: fingerprint-bind signature did not verify for %s (informational only): %v", helloID, err)
+				}
 			}
 		}
 		s.mu.Lock()
@@ -758,11 +774,12 @@ func (s *Session) SendFile(path string) error {
 			return err
 		}
 	}
+	// §9: send file-done before closing the file DC so the control channel
+	// is still reachable when the message is delivered.
+	s.controlSend(map[string]string{"type": "file-done", "xid": xid, "sha256": sha256hex})
 	if err := dc.Close(); err != nil {
 		return err
 	}
-	// §9: send file-done with the pre-computed hash so the receiver can verify.
-	s.controlSend(map[string]string{"type": "file-done", "xid": xid, "sha256": sha256hex})
 	return nil
 }
 
@@ -776,13 +793,20 @@ func (s *Session) AcceptOffer(offer FileOffer, downloadDir string) {
 	if info, err := os.Stat(partPath); err == nil && info.Size() < offer.Size {
 		offset = info.Size()
 	}
-	s.controlSend(map[string]string{"type": "file-accept", "xid": offer.XID, "offset": fmt.Sprint(offset)})
+	// Register doneCh before sending file-accept so file-done can never arrive
+	// before the channel exists (small files finish before wireFileRecv runs).
+	doneCh := make(chan string, 1)
 	s.mu.Lock()
+	if s.pendingDones == nil {
+		s.pendingDones = make(map[string]chan string)
+	}
+	s.pendingDones[offer.XID] = doneCh
 	if s.pendingRecvs == nil {
 		s.pendingRecvs = make(map[string]*recvState)
 	}
-	s.pendingRecvs[offer.XID] = &recvState{offer: offer, dir: downloadDir, have: offset}
+	s.pendingRecvs[offer.XID] = &recvState{offer: offer, dir: downloadDir, have: offset, doneCh: doneCh}
 	s.mu.Unlock()
+	s.controlSend(map[string]string{"type": "file-accept", "xid": offer.XID, "offset": fmt.Sprint(offset)})
 }
 
 func (s *Session) RejectOffer(xid string) {
@@ -790,10 +814,11 @@ func (s *Session) RejectOffer(xid string) {
 }
 
 type recvState struct {
-	offer FileOffer
-	dir   string
-	have  int64
-	f     *os.File
+	offer  FileOffer
+	dir    string
+	have   int64
+	f      *os.File
+	doneCh chan string
 }
 
 func (s *Session) wireFileRecv(dc *webrtc.DataChannel) {
@@ -884,13 +909,9 @@ func (s *Session) wireFileRecv(dc *webrtc.DataChannel) {
 			}
 
 			// §9: wait for file-done and verify sha256 before reporting success.
-			doneCh := make(chan string, 1)
-			s.mu.Lock()
-			if s.pendingDones == nil {
-				s.pendingDones = make(map[string]chan string)
-			}
-			s.pendingDones[xid] = doneCh
-			s.mu.Unlock()
+			// doneCh was registered in AcceptOffer before file-accept was sent,
+			// so file-done can never arrive before the channel exists.
+			doneCh := rs.doneCh
 			var expectedSHA256 string
 			select {
 			case expectedSHA256 = <-doneCh:

cli/watch.toml.example

@@ -0,0 +1,27 @@
+# flit watch config — copy to ~/.flit/watch.toml and fill in.
+#
+# Run with: flit watch
+# Sanity-check what would be sent, without connecting to anything:
+#   flit watch --dry-run
+#
+# One-way sync only: new/changed files in `dir` are pushed to `peer_id`.
+# Deletes are never propagated. The receiving device just needs to be
+# running `flit daemon` with this device listed as a trusted peer.
+
+# Required — WebSocket URL of your waste-go anchor
+signal_url = "wss://your-anchor.example.com/ws"
+
+# Optional — TURN relay for cross-network transfers
+turn_url    = "turn:your-anchor.example.com:3478"
+turn_secret = ""   # coturn use-auth-secret; leave empty to use STUN only
+
+# One [[watch]] block per watched directory. Multiple entries may target
+# different peers, or the same peer — entries sharing a peer_id share one
+# connection.
+
+[[watch]]
+dir        = "~/backups/documents"
+peer_id    = "aabbccddeeff..."   # hex Ed25519 pubkey of the destination device
+peer_label = "home-server"
+pattern    = "*.pdf,*.docx"      # comma-separated glob include-list; default "*" if omitted
+stable_after = "10s"             # quiet period after the last write before a file is considered ready

pwa/package-lock.json

@@ -611,6 +611,29 @@
         "node": "^20.19.0 || >=22.12.0"
       }
     },
+    "node_modules/@rolldown/binding-wasm32-wasi/node_modules/@emnapi/core": {
+      "version": "1.11.1",
+      "resolved": "https://registry.npmjs.org/@emnapi/core/-/core-1.11.1.tgz",
+      "integrity": "sha512-RSvbQmHzdKzNsLYa/wHrbc3KN4sYLKAdPZxqiM2HATqv/SBk2/ENSHpvXGaLOMcsAyz0poEGqkmmKYG3OWiJEQ==",
+      "dev": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "@emnapi/wasi-threads": "1.2.2",
+        "tslib": "^2.4.0"
+      }
+    },
+    "node_modules/@rolldown/binding-wasm32-wasi/node_modules/@emnapi/runtime": {
+      "version": "1.11.1",
+      "resolved": "https://registry.npmjs.org/@emnapi/runtime/-/runtime-1.11.1.tgz",
+      "integrity": "sha512-vgj7R3y3Wgx24IQaGPA/R6YFXLHVMOZ0uVEyIQPaWs+rd1AzfEMXlAC22FYwO1XkKR6NPsq7mUandH8oIRdZFw==",
+      "dev": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "tslib": "^2.4.0"
+      }
+    },
     "node_modules/@rolldown/binding-win32-arm64-msvc": {
       "version": "1.1.3",
       "resolved": "https://registry.npmjs.org/@rolldown/binding-win32-arm64-msvc/-/binding-win32-arm64-msvc-1.1.3.tgz",
@@ -676,7 +699,6 @@
       "integrity": "sha512-fRa09kZTgu8o71KFcDjUFuc7F+dEbZYZmkI0mg5YBTRs0yMKjYHsq/c0urDKeDb+D5qVgXOdFcuu+DZPKOITwA==",
       "dev": true,
       "license": "MIT",
-      "peer": true,
       "dependencies": {
         "undici-types": "~7.18.0"
       }

pwa/package.json

@@ -2,6 +2,7 @@
   "name": "pwa",
   "private": true,
   "version": "0.0.0",
+  "license": "MIT",
   "type": "module",
   "scripts": {
     "dev": "vite",

pwa/src/App.css

@@ -278,6 +278,19 @@
   font-weight: 400;
 }
 
+.presence-dot {
+  display: inline-block;
+  width: 8px;
+  height: 8px;
+  border-radius: 50%;
+  margin-right: 6px;
+  vertical-align: middle;
+}
+
+.presence-online { background: var(--accent); box-shadow: 0 0 4px var(--accent); }
+.presence-offline { background: var(--muted); opacity: 0.5; }
+.presence-unknown { background: var(--muted); opacity: 0.25; }
+
 .peer-id {
   font-family: var(--mono);
   font-size: 11px;

pwa/src/App.tsx

@@ -1,6 +1,6 @@
 import { useEffect, useRef, useState } from 'react'
 import QRCode from 'qrcode'
-import { FlitSession, type FileOfferEvent, type FileProgressEvent, type FileRecvEvent, type FileSendProgressEvent, type FileSentEvent, type FlitConfig } from './transport/flit'
+import { FlitSession, queryPresence, netHash, type FileOfferEvent, type FileProgressEvent, type FileRecvEvent, type FileSendProgressEvent, type FileSentEvent, type FlitConfig } from './transport/flit'
 import { createInvite, decodeInvite, pairRoomName } from './pairing/ephemeral'
 import { QrScanner } from './pairing/QrScanner'
 import { addTrusted, listTrusted, removeTrusted, setAutoAccept, shouldAutoAccept, type TrustedPeer } from './pairing/keyring'
@@ -40,6 +40,7 @@ function App() {
   const [sentFiles, setSentFiles] = useState<FileSentEvent[]>([])
   const [scanning, setScanning] = useState(false)
   const [myId, setMyId] = useState<string | null>(null)
+  const [presence, setPresence] = useState<Record<string, boolean | null>>({})
   const [addIdInput, setAddIdInput] = useState('')
   const [copied, setCopied] = useState<'snip' | 'id' | null>(null)
   const sessionRef = useRef<FlitSession | null>(null)
@@ -65,6 +66,32 @@ function App() {
     return c
   }
 
+  // Presence check for known devices (waste-go EXT-009). Each pairing has its
+  // own deterministic anchor room, so this is one short-lived query per
+  // device — no persistent connection held while idle.
+  async function refreshPresence() {
+    if (!myId || trusted.length === 0) return
+    const signalURL = cfg().signalURL
+    const results = await Promise.all(trusted.map(async (p) => {
+      try {
+        const hash = await netHash(pairRoomName(myId, p.id))
+        const online = await queryPresence(signalURL, hash, p.id)
+        return [p.id, online] as const
+      } catch {
+        return [p.id, null] as const
+      }
+    }))
+    setPresence(Object.fromEntries(results))
+  }
+
+  useEffect(() => {
+    if (mode !== 'known' || phase !== 'idle' || !myId || trusted.length === 0) return
+    void refreshPresence()
+    const iv = setInterval(() => void refreshPresence(), 15000)
+    return () => clearInterval(iv)
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, [mode, phase, myId, trusted])
+
   function peerEvents() {
     return {
       connected: (v: boolean, pid: string) => { setVerified(v); verifiedRef.current = v; setPeerId(pid); setPhase('connected') },
@@ -259,7 +286,13 @@ function App() {
                     <li key={p.id} className="known-row">
                       <div className="known-top">
                         <div className="known-info">
-                          <span className="known-label">{p.label}</span>
+                          <span className="known-label">
+                            <span
+                              className={`presence-dot ${presence[p.id] === true ? 'presence-online' : presence[p.id] === false ? 'presence-offline' : 'presence-unknown'}`}
+                              title={presence[p.id] === true ? 'Online' : presence[p.id] === false ? 'Offline' : 'Unknown'}
+                            />
+                            {p.label}
+                          </span>
                           <span className="peer-id">{p.id.slice(0, 16)}…</span>
                         </div>
                         <div className="known-secondary">

pwa/src/transport/flit.ts

@@ -79,6 +79,38 @@ export async function netHash(name: string): Promise<string> {
   throw new Error('SHA-256 not available in this browser runtime')
 }
 
+// queryPresence asks the anchor whether `id` is currently connected in
+// network `net` (waste-go EXT-009). Opens a short-lived WS connection —
+// no join, no identity signature required, since the query is anchor-local
+// and scoped to a (net, id) pair the caller must already know. Resolves
+// `null` on timeout/error (treat the same as "unknown", not "offline").
+export function queryPresence(url: string, net: string, id: string, timeoutMs = 4000): Promise<boolean | null> {
+  return new Promise((resolve) => {
+    let settled = false
+    const ws = new WebSocket(url)
+    const finish = (result: boolean | null) => {
+      if (settled) return
+      settled = true
+      clearTimeout(timer)
+      try { ws.close() } catch { /* ignore */ }
+      resolve(result)
+    }
+    const timer = setTimeout(() => finish(null), timeoutMs)
+    ws.onopen = () => {
+      try { ws.send(JSON.stringify({ type: 'presence_query', net, id })) } catch { finish(null) }
+    }
+    ws.onmessage = (ev) => {
+      let m: Record<string, unknown>
+      try { m = JSON.parse(ev.data) } catch { return }
+      if (m['type'] === 'presence' && m['id'] === id && m['net'] === net) {
+        finish(Boolean(m['online']))
+      }
+    }
+    ws.onerror = () => finish(null)
+    ws.onclose = () => finish(null)
+  })
+}
+
 // ── Identity ─────────────────────────────────────────────────────────────────
 
 export class Identity {
@@ -403,15 +435,23 @@ export class PeerConn {
   }
 
   private _sendHello() {
+    // §6: sign prefix || local_fp || remote_fp when both are extractable.
+    // Best-effort, not required — different WebRTC stacks report the DTLS
+    // certificate hash under different algorithms (WebKit: sha-512,
+    // pion/Chromium: sha-256), so a legitimate cross-stack peer may have no
+    // fingerprint we know how to parse. Trust rests on the sealed signaling
+    // exchange that already authenticated peerId (peerAuthed, set in onBox)
+    // plus hello.id matching it, not on this signature — see _onControl.
+    const msg: Record<string, string> = { type: 'hello', id: this.identity.id }
     try {
       const lfp = dtlsFP(this.pc.localDescription!.sdp)
       const rfp = dtlsFP(this.pc.remoteDescription!.sdp)
-      // §6: sender signs prefix || local_fp || remote_fp
       const bindMsg = concat(enc(BIND_PREFIX), lfp, rfp)
-      this._dc({ type: 'hello', id: this.identity.id, sig: sodium.to_hex(this.identity.sign(bindMsg)) })
-    } catch (e) {
-      console.error('flit: sendHello fingerprint error', e)
+      msg['sig'] = sodium.to_hex(this.identity.sign(bindMsg))
+    } catch {
+      // no parseable fingerprint on one or both sides — hello still goes out
     }
+    this._dc(msg)
   }
 
   private _onControl(data: string) {
@@ -420,17 +460,28 @@ export class PeerConn {
 
     if (m['type'] === 'hello') {
       const helloId = m['id'] as string
-      const helloSig = sodium.from_hex(m['sig'] as string)
-      try {
-        // §6: verifier reconstructs prefix || remote_fp || local_fp
-        // (sender's local = our remote; sender's remote = our local)
-        const rfp = dtlsFP(this.pc.remoteDescription!.sdp)
-        const lfp = dtlsFP(this.pc.localDescription!.sdp)
-        const bindMsg = concat(enc(BIND_PREFIX), rfp, lfp)
-        const sigOk = Identity.verify(helloId, bindMsg, helloSig)
-        this.verified = helloId === this.peerId && sigOk && this.peerAuthed
-      } catch {
-        this.verified = false
+      // Trust rests on the sealed signaling exchange that already
+      // authenticated peerId (peerAuthed, set in onBox) plus hello.id
+      // matching it — not on the fingerprint-bound signature below, which
+      // is only checkable when both sides report their DTLS cert hash
+      // under an algorithm we can parse. See _sendHello for why that
+      // can't be a hard requirement.
+      this.verified = helloId === this.peerId && this.peerAuthed
+      const sigHex = m['sig'] as string | undefined
+      if (sigHex) {
+        try {
+          // §6: verifier reconstructs prefix || remote_fp || local_fp
+          // (sender's local = our remote; sender's remote = our local)
+          const rfp = dtlsFP(this.pc.remoteDescription!.sdp)
+          const lfp = dtlsFP(this.pc.localDescription!.sdp)
+          const bindMsg = concat(enc(BIND_PREFIX), rfp, lfp)
+          const helloSig = sodium.from_hex(sigHex)
+          if (!Identity.verify(helloId, bindMsg, helloSig)) {
+            console.warn(`flit: hello: fingerprint-bind signature did not verify for ${helloId} (informational only)`)
+          }
+        } catch {
+          // no parseable fingerprint on one or both sides — nothing to check
+        }
       }
       this.events.connected?.(this.verified, this.peerId)
     } else if (m['type'] === 'file-offer') {
@@ -510,9 +561,10 @@ export class PeerConn {
       this.events.fileSendProgress?.({ peer: this.peerId, xid, name: file.name, sent: resumeOffset + localOffset, total: file.size })
       await new Promise(r => setTimeout(r, 0))
     }
-    dc.close()
-    // §9: send file-done with sha256 so receiver can verify integrity.
+    // §9: send file-done before closing the file DC so the control channel
+    // is still healthy when the message is dispatched.
     this._dc({ type: 'file-done', xid, sha256: hash })
+    dc.close()
     this.events.fileSent?.({ peer: this.peerId, xid, name: file.name })
   }